Often, your car is the last thing you think about when cleaning your house. After all, cars are able to take care of themselves, right? This isn’t the case, at least not if you want your car to be in its best condition.
If you want to learn more about car detailing, keep reading. We’re about to discuss some common errors that you should be aware of. With that knowledge, you can avoid those errors in car detailing.
Sound good? Then let’s dive in!
1. Incorrect Type of Cleaning Tools
Most often, the wrong type of cleaning tools are used to clean, polish, and protect the vehicle’s interior and exterior surfaces. When using cloths and sponges, always check the product label to ensure you use a tool suitable for the task at hand.
Always pay attention and ensure the correct cleaning tools are used in order to prevent damage to the car and to obtain the desired results.
2. Unsuitable Cleaning Solutions
Using generic household cleaners, solvents, or high pH or alkaline cleaners that are not specifically designed for car detailing can cause a range of problems, from not protecting car paint to interior upholstery, rubber, plastic, and chrome surfaces.
To avoid this, use only cleaning solutions that are specifically designed for automobile detailing. Avoid using excessive amounts of cleaning solution; too much can lead to streaking, water spots, and other issues.
3. Leaving Marks by Improper Drying
Leaving marks from improper drying is one of the most common errors in car detailing. A common mistake is to simply wipe it down with a towel, which can scratch or smear the paint of the car.
When drying a car, using a drying towel, a chamois, or an absorbent microfiber cloth is essential. Remove excess water as soon as possible to avoid water spots. Additionally, always dry the car from the top down.
4. Improper Waxing and Polishing
Improper waxing and polishing is a common error in the car detailing process. To avoid this, make sure to use the appropriate products for the material being worked on and that the surface is properly prepared.
When waxing or polishing the car, apply each product with the appropriate applicator and follow the instructions carefully. An uneven application of wax or polish can leave the vehicle looking patchy and mistreated.
5. Applying Too Much Wax
When detailing a car, one of the most common errors is applying too much wax to the vehicle’s surface. This can lead to damage due to wax build-up, which can harm the paint.
To avoid this mistake, it’s important to use wax only on small sections of the car at a time. Applying wax too quickly or in large amounts can cause it to build a thick layer and create a permanent dull finish.
6. Incorrect Vacuuming Technique
When vacuuming, it is important to ensure that the vacuum head moves along the entire surface area of the fabric and carpets in order to pick up all dirt and debris.
For a more thorough job, detailers can also use carpet brushes and cranny tools to get dirt and debris out of nooks and crannies. Taking the time and effort to ensure a thorough vacuuming job will ensure a high-quality and professional finish like those from a premium car detailing service.
Avoid These Errors in Car Detailing Today
Car detailing protects your car from the elements and can increase its value. By avoiding these errors in car detailing, your car will look superb and last longer.
Start detailing today to protect your car and increase its value!
Check our blogs for more!